| |
|
|
About Us
- First Indian Geomembrane Manufacturer in Multilayer Film Extrusion With highest output
- First Indian Geomembrane Manufacturer in maximum width 7 meters up to 2.50mm
- First Indian Geomembrane Manufacturer in processing in textured (onside / both side)
- First Indian Geomembrane Manufacturer for supplying in roll form by automatic winder
- First Indian Geomembrane Manufacturer for supplying in two coloured sheets (both side).
- First Indian Geomembrane Manufacturer with minimum thickness tolerance.
- First Indian Geomembrane Manufacturer with international specification and world class technology.
- First Indian Geomembrane Manufacturer can be produced 100% HDPE/LDPE and *LLDPE film in higher thickness and larger with highest mechanical properties, supplier and installer in India.
There are eight ways to decide which is the best.
Apart from these we are also supplier and installer of Geotextile (Woven and Non woven) Geogrid, Gabion boxes, Geosynthetics Clay Liner, Geonet , Green House Film.
Using of Geomembrane is environmental, Geotechnical, hydraulic and transportation activities are listed below. (from 50 Microns to 2500 Microns)
- Liners of portable water
- Liners for reserve water(e.g. Safe shutdown of nuclear facilities)
- Liners for waste liquids
- Liners for radioactive waste liquid
- Liners for secondary containment of underground storage tanks
- Liners for solar ponds
- Liners for brine solutions
- Liners for waste conveyance
- Liners for Primary Secondary and tertiary solid waste land fills
- Covers (caps) fro solid waste landfills
- Within cut-off walls for seepage control at hazardous waste sites
- Within zoned earth dams for seepage control
- Linings for emergency spillways
- Waterproofing within coffer dams for seepage control
- Floating reservoirs for seepage control
- To from barrier tubes as dams
- To control odors in landfills
- To control vapors cradon(hydrocarbons etc) beneath buildings
- To control expansive soils
- To control frost susceptible soils
- To shield sink hold susceptible areas from flowing water
- To prevent infiltration of water in sensitive areas
- To face structural supports as temporary dams
- To conduct water flow in preferred paths
- To act containment structures for temporary surcharges
- To collect surface run off water & rain water
- To line pipes and chamber
- To line canal/golf swimming pools
- To line tannery waste treatment ponds
- To line acid tanks floor
- To act as contour bunding.
- Floating covers for preventing pollution
|
|
