• A manufacturer who can produce 100% HDPE / LDPE and LLDPE film in higher thickness and largest width with highest mechanical properties, largest supplier in india
  
  
• In Multilayer Film Extrusion with highest output.



• In maximum width 7mtrs upto 2.5mm



• With minumum thickness tolerance



• In processing in textured(oneside / bothside)



• For supplying in Roll form by Automatic winder



• For supplying in two coloured sheets(both side)



• A Manufacturer with International and world class technology

  There are 8 ways to decide which is the best.

• First Indian Geomembrane Manufacturer in Multilayer Film Extrusion With highest output



• First Indian Geomembrane Manufacturer in maximum width 7 meters up to 2.50mm



• First Indian Geomembrane Manufacturer in processing in textured (onside / both side)



• First Indian Geomembrane Manufacturer for supplying in roll form by automatic winder



• First Indian Geomembrane Manufacturer for supplying in two coloured sheets (both side).



• First Indian Geomembrane Manufacturer with minimum thickness tolerance.



• First Indian Geomembrane Manufacturer with international specification and world class technology.



• First Indian Geomembrane Manufacturer can be produced 100% HDPE/LDPE and *LLDPE film in higher thickness and larger with highest mechanical properties, supplier and installer in India.

A part from these we are also supplier and installer of Geotextile (Woven and Non woven) Geogrid, Gabion boxes, Geosynthetics Clay Liner, Geonet , Green House Film.Using of Geomembrane is environmental, Geotechnical, hydraulic and transportation activities are listed below. (from 50 Microns to 2500 Microns)

• Liners of portable water
  

• Liners for reserve water(e.g. Safe shutdown of nuclear facilities)
  

• Liners for waste liquids
  

• Liners for radioactive waste liquid
  

• Liners for secondary containment of underground storage tanks
  

• Liners for solar ponds
  

• Liners for brine solutions
  

• Liners for waste conveyance
  

• Liners for Primary Secondary and tertiary solid waste land fills
  

• Covers (caps) fro solid waste landfills
  

• Within cut-off walls for seepage control at hazardous waste sites
  

• Within zoned earth dams for seepage control
  

• Linings for emergency spillways
  

• Waterproofing within coffer dams for seepage control
  

• Floating reservoirs for seepage control
  

• To from barrier tubes as dams
  

• To control odors in landfills
  

• To control vapors cradon(hydrocarbons etc) beneath buildings
  

• To control expansive soils
  

• To control frost susceptible soils
  

• To shield sink hold susceptible areas from flowing water
  

• To prevent infiltration of water in sensitive areas
  

• To face structural supports as temporary dams
  

• To conduct water flow in preferred paths
  

• To act containment structures for temporary surcharges
  

• To collect surface run off water & rain water
  

• To line pipes and chamber
  

• To line canal/golf swimming pools
  

• To line tannery waste treatment ponds
  

• To line acid tanks floor
  

• To act as contour bunding.
  

• Floating covers for preventing pollution